MikroTik wAP ac LTE6 kit (RBwAPGR-5HacD2HnD & R11e-LTE6) is a powerful dual-band access point with a built-in R11e-LTE6 wireless modem that supports LTE networks of the 6th category, as well as 3G and 2G standards.
The modem operates in international LTE frequency bands:
LTE FDD: 1 (2100 MHz)/2 (1900 MHz)/3 (1800 MHz)/5 (850 MHz)/7 (2600 MHz)/8 (900 MHz)/12 (700 MHz)/17 (700 MHz)/20 (800 MHz)/25 (1900 MHz)/26 (850 MHz);
LTE TDD: 38 (2600 MHz)/39 (1900 MHz)/40 (2300 MHz)/41n (2500 MHz);
3G: 1 (2100 MHz)/2 (1900 MHz)/5 (850 MHz)/8 (900 MHz);
2G: 2 (1900 MHz)/3 (1800 MHz)/5 (850 MHz)/8 (900 MHz)
At 2.4 GHz, the access point supports 802.11 b/g/n Wi-Fi standards with a data rate of 300 Mbps, and in the 5 GHz band – 802.11 a/n/as, 867 Mbps.
The wAP ac LTE6 kit is powered by a quad-core IPQ-4018 processor with a clock speed of 716 MHz. It has 128 MB of RAM and 16 MB of Flash memory for storing data and settings.
The access point is equipped with MiniPCI-e and MicroSIM slots, two Gigabit Ethernet ports, one of which (PoE in) can be used to power the device according to the PoE 802.3af/at standard with a voltage of 18-57 V.
This device supports 360-degree signal omnidirectionality. The Wi-Fi antenna has a maximum gain of 2.5 dBi, and the LTE antenna (with u.FL connector) has a maximum gain of 4 dBi.
The pre-installed MikroTik RouterOS L4 operating system makes it possible to deploy wireless networks of any configuration.
Based on the popular wAP form factor, the device is weatherproof and ready for outdoor use. It can be mounted on a wall, ceiling, pole, or flat surface.
